Dishwasher Repair Labor Prices
Dishwasher Repair Labor Prices
Local Appliance Repair — detailed labor-price reference for dishwasher repair labor prices; 23 itemized operations.
Labor-only estimates for Economy, Middle and Premium model classes. Replacement parts are quoted separately. Exact operation and equipment class must be verified from model number and diagnosis.
Appliance age scenarios: 0–5 years ×1.00; over 5 through 10 years ×1.25; over 10 years ×1.50. Adjustments above ×1.00 require inspection, explanation and agreement before work. Never count identical access work twice.
Standard diagnostic visit: $65, credited toward an eligible completed repair. Six-month workmanship warranty applies to qualifying work; part warranties vary under the Company Facts policy.
Dishwasher — labor by operation
Operation / code | Economy labor | Middle labor | Premium labor |
Dishwasher door latch replacement (LAR-DIS-130) | $185 | $210 | $245 |
Dishwasher door gasket replacement (LAR-DIS-131) | $185 | $210 | $245 |
Float switch replacement (LAR-DIS-132) | $190 | $215 | $250 |
Thermal fuse replacement (LAR-DIS-133) | $180 | $205 | $235 |
Drain hose unclogging or replacement (LAR-DIS-134) | $205 | $230 | $270 |
Drain pump replacement (LAR-DIS-135) | $205 | $235 | $275 |
Circulation / wash pump replacement (LAR-DIS-136) | $285 | $325 | $380 |
Water inlet valve replacement (LAR-DIS-137) | $205 | $235 | $275 |
Heating element replacement (LAR-DIS-138) | $205 | $235 | $275 |
Detergent dispenser assembly replacement (LAR-DIS-139) | $205 | $235 | $275 |
Control panel button repair (LAR-DIS-140) | $205 | $235 | $275 |
Main control board replacement (LAR-DIS-141) | $225 | $250 | $295 |
Touchpad / keypad replacement (LAR-DIS-142) | $225 | $250 | $295 |
Wiring harness repair (LAR-DIS-143) | $240 | $270 | $315 |
Spray arm manifold replacement (LAR-DIS-144) | $240 | $270 | $315 |
Wash motor and seal assembly replacement (LAR-DIS-145) | $310 | $345 | $405 |
Complete door assembly replacement (LAR-DIS-146) | $275 | $310 | $360 |
Tub perimeter seal replacement (LAR-DIS-147) | $275 | $310 | $360 |
Drain filter cleaning (LAR-DIS-148) | $125 | $140 | $165 |
Drain pump cleaning (disassembly/reassembly) (LAR-DIS-149) | $205 | $230 | $270 |
Spray arm unclogging / cleaning (LAR-DIS-150) | $145 | $165 | $190 |
Drain hose flushing without replacement (LAR-DIS-151) | $145 | $165 | $190 |
Dispenser housing cleaning (LAR-DIS-152) | $145 | $165 | $190 |
What each listed service includes
LAR-DIS-130 — Dishwasher door latch replacement
Included work: Isolate electrical power and water supply as needed; protect flooring and cabinets. Access dishwasher door latch/interlock area and replace diagnosed latch. Reassemble and restore all disturbed guards/connections. Verification: Verify door latching and cycle start/stop.
Additional conditions: Built-in pull-out, floor/cabinet modifications, seized fasteners, additional leaking component or second operation: separately itemize; do not duplicate shared disassembly.
LAR-DIS-131 — Dishwasher door gasket replacement
Included work: Isolate electrical power and water supply as needed; protect flooring and cabinets. Remove worn door gasket; fit model-matched seal and seat corners correctly. Reassemble and restore all disturbed guards/connections. Verification: Check for door perimeter leaks during appropriate cycle.
Additional conditions: Built-in pull-out, floor/cabinet modifications, seized fasteners, additional leaking component or second operation: separately itemize; do not duplicate shared disassembly.
LAR-DIS-132 — Float switch replacement
Included work: Isolate electrical power and water supply as needed; protect flooring and cabinets. Access tub float/safety switch and replace damaged switch. Reassemble and restore all disturbed guards/connections. Verification: Check flood detection/fill cutoff and controlled filling.
Additional conditions: Built-in pull-out, floor/cabinet modifications, seized fasteners, additional leaking component or second operation: separately itemize; do not duplicate shared disassembly.
LAR-DIS-133 — Thermal fuse replacement
Included work: Isolate electrical power and water supply as needed; protect flooring and cabinets. Access dishwasher thermal fuse and replace specified fuse after checking cause of overload. Reassemble and restore all disturbed guards/connections. Verification: Check control power and protected operation.
Additional conditions: Built-in pull-out, floor/cabinet modifications, seized fasteners, additional leaking component or second operation: separately itemize; do not duplicate shared disassembly.
LAR-DIS-134 — Drain hose unclogging or replacement
Included work: Isolate electrical power and water supply as needed; protect flooring and cabinets. Clear accessible dishwasher drain hose/air-gap or replace damaged hose if included in agreed line item. Reassemble and restore all disturbed guards/connections. Verification: Run drain test and check all disturbed hose joints for leaks.
Additional conditions: Built-in pull-out, floor/cabinet modifications, seized fasteners, additional leaking component or second operation: separately itemize; do not duplicate shared disassembly.
LAR-DIS-135 — Drain pump replacement
Included work: Isolate electrical power and water supply as needed; protect flooring and cabinets. Access drain pump chamber/motor; replace diagnosed pump, restore seals and clamps. Reassemble and restore all disturbed guards/connections. Verification: Run drain cycle and inspect for leaks.
Additional conditions: Built-in pull-out, floor/cabinet modifications, seized fasteners, additional leaking component or second operation: separately itemize; do not duplicate shared disassembly.
LAR-DIS-136 — Circulation / wash pump replacement
Included work: Isolate electrical power and water supply as needed; protect flooring and cabinets. Access circulation/wash pump and motor assembly; replace specified unit and reconnect sump/seals. Reassemble and restore all disturbed guards/connections. Verification: Check wash-circulation spray pressure and sump leaks.
Additional conditions: Built-in pull-out, floor/cabinet modifications, seized fasteners, additional leaking component or second operation: separately itemize; do not duplicate shared disassembly.
LAR-DIS-137 — Water inlet valve replacement
Included work: Isolate electrical power and water supply as needed; protect flooring and cabinets. Shut off water; replace dishwasher fill inlet valve with compatible unit. Reassemble and restore all disturbed guards/connections. Verification: Verify fill, cutoff and tight water joints.
Additional conditions: Built-in pull-out, floor/cabinet modifications, seized fasteners, additional leaking component or second operation: separately itemize; do not duplicate shared disassembly.
LAR-DIS-138 — Heating element replacement
Included work: Isolate electrical power and water supply as needed; protect flooring and cabinets. Access dishwasher heating circuit; replace model-correct heater/heat-pump component as specified. Reassemble and restore all disturbed guards/connections. Verification: Check heat/dry performance and water seals where relevant.
Additional conditions: Built-in pull-out, floor/cabinet modifications, seized fasteners, additional leaking component or second operation: separately itemize; do not duplicate shared disassembly.
LAR-DIS-139 — Detergent dispenser assembly replacement
Included work: Isolate electrical power and water supply as needed; protect flooring and cabinets. Access detergent dispenser on door; replace dispenser body and reconnect latch/wiring. Reassemble and restore all disturbed guards/connections. Verification: Check dispense release and door-side leaks.
Additional conditions: Built-in pull-out, floor/cabinet modifications, seized fasteners, additional leaking component or second operation: separately itemize; do not duplicate shared disassembly.
LAR-DIS-140 — Control panel button repair
Included work: Isolate electrical power and water supply as needed; protect flooring and cabinets. Access button assembly only where serviceable; repair affected button contact/actuator. Reassemble and restore all disturbed guards/connections. Verification: Verify selection, control response and door closure.
Additional conditions: Built-in pull-out, floor/cabinet modifications, seized fasteners, additional leaking component or second operation: separately itemize; do not duplicate shared disassembly.
LAR-DIS-141 — Main control board replacement
Included work: Isolate electrical power and water supply as needed; protect flooring and cabinets. Access dishwasher controller board and replace diagnosed module. Reassemble and restore all disturbed guards/connections. Verification: Check wash-program control, error codes and basic cycle functions.
Additional conditions: Built-in pull-out, floor/cabinet modifications, seized fasteners, additional leaking component or second operation: separately itemize; do not duplicate shared disassembly.
LAR-DIS-142 — Touchpad / keypad replacement
Included work: Isolate electrical power and water supply as needed; protect flooring and cabinets. Access touchscreen/keyboard module and replace approved panel or membrane. Reassemble and restore all disturbed guards/connections. Verification: Verify input and display/indicator functions.
Additional conditions: Built-in pull-out, floor/cabinet modifications, seized fasteners, additional leaking component or second operation: separately itemize; do not duplicate shared disassembly.
LAR-DIS-143 — Wiring harness repair
Included work: Isolate electrical power and water supply as needed; protect flooring and cabinets. Access dishwasher harness; repair known damaged connectors and restore routing. Reassemble and restore all disturbed guards/connections. Verification: Check affected control/motor/fill circuit and moisture protection.
Additional conditions: Built-in pull-out, floor/cabinet modifications, seized fasteners, additional leaking component or second operation: separately itemize; do not duplicate shared disassembly.
LAR-DIS-144 — Spray arm manifold replacement
Included work: Isolate electrical power and water supply as needed; protect flooring and cabinets. Access spray-arm feed manifold; replace worn tube/connector/gasket. Reassemble and restore all disturbed guards/connections. Verification: Check unobstructed spray arm rotation and leakage.
Additional conditions: Built-in pull-out, floor/cabinet modifications, seized fasteners, additional leaking component or second operation: separately itemize; do not duplicate shared disassembly.
LAR-DIS-145 — Wash motor and seal assembly replacement
Included work: Isolate electrical power and water supply as needed; protect flooring and cabinets. Remove wash motor and specified seal assembly; replace approved components and restore sump. Reassemble and restore all disturbed guards/connections. Verification: Check wash circulation and water tightness.
Additional conditions: Built-in pull-out, floor/cabinet modifications, seized fasteners, additional leaking component or second operation: separately itemize; do not duplicate shared disassembly.
LAR-DIS-146 — Complete door assembly replacement
Included work: Isolate electrical power and water supply as needed; protect flooring and cabinets. Remove and replace supported complete door assembly and transfer approved hardware. Reassemble and restore all disturbed guards/connections. Verification: Verify alignment, latch and door seal with leak test.
Additional conditions: Built-in pull-out, floor/cabinet modifications, seized fasteners, additional leaking component or second operation: separately itemize; do not duplicate shared disassembly.
LAR-DIS-147 — Tub perimeter seal replacement
Included work: Isolate electrical power and water supply as needed; protect flooring and cabinets. Access model-specific tub edge/perimeter seal and repair/replace only where manufacturer supplies serviceable component. Reassemble and restore all disturbed guards/connections. Verification: Confirm no leak around serviced tub area; entire tub replacement is not implied.
Additional conditions: Built-in pull-out, floor/cabinet modifications, seized fasteners, additional leaking component or second operation: separately itemize; do not duplicate shared disassembly.
LAR-DIS-148 — Drain filter cleaning
Included work: Isolate electrical power and water supply as needed; protect flooring and cabinets. Remove and clean dishwasher filter assembly accessible to model; reseat correctly. Reassemble and restore all disturbed guards/connections. Verification: Verify drainage and filter seating.
Additional conditions: Built-in pull-out, floor/cabinet modifications, seized fasteners, additional leaking component or second operation: separately itemize; do not duplicate shared disassembly.
LAR-DIS-149 — Drain pump cleaning (disassembly/reassembly)
Included work: Isolate electrical power and water supply as needed; protect flooring and cabinets. Open serviceable drain pump chamber and remove clog/foreign material; resecure seals. Reassemble and restore all disturbed guards/connections. Verification: Test pump drainage and inspect for leaks.
Additional conditions: Built-in pull-out, floor/cabinet modifications, seized fasteners, additional leaking component or second operation: separately itemize; do not duplicate shared disassembly.
LAR-DIS-150 — Spray arm unclogging / cleaning
Included work: Isolate electrical power and water supply as needed; protect flooring and cabinets. Remove spray arm if permitted, clear blocked jets and replace arm securely. Reassemble and restore all disturbed guards/connections. Verification: Verify free rotation and wash spray.
Additional conditions: Built-in pull-out, floor/cabinet modifications, seized fasteners, additional leaking component or second operation: separately itemize; do not duplicate shared disassembly.
LAR-DIS-151 — Drain hose flushing without replacement
Included work: Isolate electrical power and water supply as needed; protect flooring and cabinets. Disconnect and flush accessible dishwasher drain hose without replacement. Reassemble and restore all disturbed guards/connections. Verification: Run drain test and check reconnection leaks.
Additional conditions: Built-in pull-out, floor/cabinet modifications, seized fasteners, additional leaking component or second operation: separately itemize; do not duplicate shared disassembly.
LAR-DIS-152 — Dispenser housing cleaning
Included work: Isolate electrical power and water supply as needed; protect flooring and cabinets. Clean accessible dispenser cup and housing deposits without opening controller. Reassemble and restore all disturbed guards/connections. Verification: Check latch/release and rinse-away behavior.
Additional conditions: Built-in pull-out, floor/cabinet modifications, seized fasteners, additional leaking component or second operation: separately itemize; do not duplicate shared disassembly.


Comments