top of page

Dryer Repair Labor Prices

10 hours ago
7 min read

Dryer Repair Labor Prices

Local Appliance Repair — detailed labor-price reference for dryer repair labor prices; 24 itemized operations.

Labor-only estimates for Economy, Middle and Premium model classes. Replacement parts are quoted separately. Exact operation and equipment class must be verified from model number and diagnosis.

Appliance age scenarios: 0–5 years ×1.00; over 5 through 10 years ×1.25; over 10 years ×1.50. Adjustments above ×1.00 require inspection, explanation and agreement before work. Never count identical access work twice.

Standard diagnostic visit: $65, credited toward an eligible completed repair. Six-month workmanship warranty applies to qualifying work; part warranties vary under the Company Facts policy.


Dryer — labor by operation

Operation / code

Economy labor

Middle labor

Premium labor

Door switch replacement (LAR-DRY-062)

$175

$195

$230

Thermal fuse replacement (LAR-DRY-063)

$185

$210

$245

Start switch replacement (LAR-DRY-064)

$185

$210

$245

Drum drive belt replacement (LAR-DRY-065)

$200

$225

$265

Door latch replacement (LAR-DRY-066)

$175

$195

$230

Flexible vent hose replacement (LAR-DRY-067)

$175

$195

$230

Electric heating element replacement (LAR-DRY-068)

$250

$280

$335

High-limit thermostat replacement (LAR-DRY-069)

$205

$235

$275

Cycling thermostat replacement (LAR-DRY-070)

$205

$235

$275

Gas burner igniter replacement (LAR-DRY-071)

$230

$260

$300

Gas flame sensor replacement (LAR-DRY-072)

$220

$245

$290

Drum roller / drum bearing replacement (LAR-DRY-073)

$225

$255

$295

Idler pulley replacement (LAR-DRY-074)

$220

$245

$290

Drum assembly replacement (LAR-DRY-075)

$220

$245

$285

Control / interface board replacement (LAR-DRY-076)

$230

$260

$300

Drive motor replacement (LAR-DRY-077)

$230

$260

$300

Timer assembly replacement (LAR-DRY-078)

$230

$260

$300

Gas valve coil replacement (LAR-DRY-079)

$255

$285

$335

Blower wheel replacement (LAR-DRY-080)

$245

$275

$320

Wiring harness repair (LAR-DRY-081)

$275

$310

$360

Complete gas valve assembly replacement (LAR-DRY-082)

$365

$410

$480

Internal lint and accessible exhaust cleaning (LAR-DRY-083)

$180

$205

$235

Moisture sensor cleaning (LAR-DRY-084)

$125

$140

$165

Gas burner area cleaning (LAR-DRY-085)

$160

$180

$210

What each listed service includes

LAR-DRY-062 — Door switch replacement

Included work: Isolate electrical power; protect dryer and nearby surfaces. Access dryer door switch; replace switch and reconnect. Reassemble and restore all disturbed guards/connections. Verification: Verify door sensing and safe start/stop.

Additional conditions: Stacked removal, restricted building exhaust, seized fasteners, gas-system work or additional diagnosed operation: quote incremental labor before repair.

LAR-DRY-063 — Thermal fuse replacement

Included work: Isolate electrical power; protect dryer and nearby surfaces. Locate failed dryer thermal fuse and replace it after diagnosing overheating or blocked airflow cause. Reassemble and restore all disturbed guards/connections. Verification: Verify run/heat conditions and airflow; fuse is not a root-cause fix.

Additional conditions: Stacked removal, restricted building exhaust, seized fasteners, gas-system work or additional diagnosed operation: quote incremental labor before repair.

LAR-DRY-064 — Start switch replacement

Included work: Isolate electrical power; protect dryer and nearby surfaces. Access dryer start switch/control; replace switch and reconnect. Reassemble and restore all disturbed guards/connections. Verification: Confirm start/stop function.

Additional conditions: Stacked removal, restricted building exhaust, seized fasteners, gas-system work or additional diagnosed operation: quote incremental labor before repair.

LAR-DRY-065 — Drum drive belt replacement

Included work: Isolate electrical power; protect dryer and nearby surfaces. Access drum drive belt; remove broken belt, route replacement on motor/idler and reseat panels. Reassemble and restore all disturbed guards/connections. Verification: Verify drum rotation and noise under operation.

Additional conditions: Stacked removal, restricted building exhaust, seized fasteners, gas-system work or additional diagnosed operation: quote incremental labor before repair.

LAR-DRY-066 — Door latch replacement

Included work: Isolate electrical power; protect dryer and nearby surfaces. Access dryer door catch/latch; replace damaged catch and adjust closure. Reassemble and restore all disturbed guards/connections. Verification: Confirm door latches and sensing reliably.

Additional conditions: Stacked removal, restricted building exhaust, seized fasteners, gas-system work or additional diagnosed operation: quote incremental labor before repair.

LAR-DRY-067 — Flexible vent hose replacement

Included work: Isolate electrical power; protect dryer and nearby surfaces. Remove deteriorated accessible flexible dryer exhaust duct and fit approved duct material with secure clamps. Reassemble and restore all disturbed guards/connections. Verification: Verify exhaust airflow and safe clearance; excludes building-duct cleaning.

Additional conditions: Stacked removal, restricted building exhaust, seized fasteners, gas-system work or additional diagnosed operation: quote incremental labor before repair.

LAR-DRY-068 — Electric heating element replacement

Included work: Isolate electrical power; protect dryer and nearby surfaces. On an electric resistance dryer, access heater housing and replace failed heating element. Reassemble and restore all disturbed guards/connections. Verification: Check controlled heat and airflow; not applicable to gas or heat-pump variants.

Additional conditions: Stacked removal, restricted building exhaust, seized fasteners, gas-system work or additional diagnosed operation: quote incremental labor before repair.

LAR-DRY-069 — High-limit thermostat replacement

Included work: Isolate electrical power; protect dryer and nearby surfaces. Access failed high-limit thermostat; replace specified thermostat and diagnose underlying heat/airflow restriction. Reassemble and restore all disturbed guards/connections. Verification: Check temperature cycling and airflow; avoid simply bypassing limiter.

Additional conditions: Stacked removal, restricted building exhaust, seized fasteners, gas-system work or additional diagnosed operation: quote incremental labor before repair.

LAR-DRY-070 — Cycling thermostat replacement

Included work: Isolate electrical power; protect dryer and nearby surfaces. Access cycling thermostat on equipped designs; replace and reseat its thermal interface. Reassemble and restore all disturbed guards/connections. Verification: Verify controlled cycling and temperature response.

Additional conditions: Stacked removal, restricted building exhaust, seized fasteners, gas-system work or additional diagnosed operation: quote incremental labor before repair.

LAR-DRY-071 — Gas burner igniter replacement

Included work: Qualified gas-appliance technician isolates electrical and gas supplies where required. On a gas dryer, qualified technician accesses burner igniter and replaces diagnosed igniter. Reassemble and restore all disturbed guards/connections. Verification: Verify safe ignition and heating sequence.

Additional conditions: Stacked removal, restricted building exhaust, seized fasteners, gas-system work or additional diagnosed operation: quote incremental labor before repair.

LAR-DRY-072 — Gas flame sensor replacement

Included work: Qualified gas-appliance technician isolates electrical and gas supplies where required. On a gas dryer, qualified technician replaces diagnosed flame/radiant sensor. Reassemble and restore all disturbed guards/connections. Verification: Verify gas ignition sequence and temperature response.

Additional conditions: Stacked removal, restricted building exhaust, seized fasteners, gas-system work or additional diagnosed operation: quote incremental labor before repair.

LAR-DRY-073 — Drum roller / drum bearing replacement

Included work: Isolate electrical power; protect dryer and nearby surfaces. Access drum support rollers/bearing; replace diagnosed support units in recommended set and refit drum. Reassemble and restore all disturbed guards/connections. Verification: Verify smooth drum rotation and vibration/noise.

Additional conditions: Stacked removal, restricted building exhaust, seized fasteners, gas-system work or additional diagnosed operation: quote incremental labor before repair.

LAR-DRY-074 — Idler pulley replacement

Included work: Isolate electrical power; protect dryer and nearby surfaces. Access belt tensioner; replace worn idler pulley and refit drive belt. Reassemble and restore all disturbed guards/connections. Verification: Verify proper tension and quiet drum rotation.

Additional conditions: Stacked removal, restricted building exhaust, seized fasteners, gas-system work or additional diagnosed operation: quote incremental labor before repair.

LAR-DRY-075 — Drum assembly replacement

Included work: Isolate electrical power; protect dryer and nearby surfaces. Disassemble cabinet sufficiently to remove and replace compatible drum assembly. Reassemble and restore all disturbed guards/connections. Verification: Verify drum support, sealing/felt contact and rotation.

Additional conditions: Stacked removal, restricted building exhaust, seized fasteners, gas-system work or additional diagnosed operation: quote incremental labor before repair.

LAR-DRY-076 — Control / interface board replacement

Included work: Isolate electrical power; protect dryer and nearby surfaces. Access dryer main control/interface board; replace diagnosed module and configure as specified. Reassemble and restore all disturbed guards/connections. Verification: Verify controls, codes and drying sequence.

Additional conditions: Stacked removal, restricted building exhaust, seized fasteners, gas-system work or additional diagnosed operation: quote incremental labor before repair.

LAR-DRY-077 — Drive motor replacement

Included work: Isolate electrical power; protect dryer and nearby surfaces. Access motor/blower drive; replace diagnosed motor and restore belt/blower connections. Reassemble and restore all disturbed guards/connections. Verification: Check drive, airflow and controlled heat where equipped.

Additional conditions: Stacked removal, restricted building exhaust, seized fasteners, gas-system work or additional diagnosed operation: quote incremental labor before repair.

LAR-DRY-078 — Timer assembly replacement

Included work: Isolate electrical power; protect dryer and nearby surfaces. Access mechanical timer on applicable models; replace timer and verify wiring harness. Reassemble and restore all disturbed guards/connections. Verification: Check timer advance and cycle selection.

Additional conditions: Stacked removal, restricted building exhaust, seized fasteners, gas-system work or additional diagnosed operation: quote incremental labor before repair.

LAR-DRY-079 — Gas valve coil replacement

Included work: Qualified gas-appliance technician isolates electrical and gas supplies where required. On gas dryer, qualified technician replaces diagnosed gas-valve coils without replacing full valve where manufacturer permits. Reassemble and restore all disturbed guards/connections. Verification: Verify burner cycling and correct ignition.

Additional conditions: Stacked removal, restricted building exhaust, seized fasteners, gas-system work or additional diagnosed operation: quote incremental labor before repair.

LAR-DRY-080 — Blower wheel replacement

Included work: Isolate electrical power; protect dryer and nearby surfaces. Access blower housing; replace broken blower wheel and clean safe accessible debris. Reassemble and restore all disturbed guards/connections. Verification: Check exhaust airflow and vibration.

Additional conditions: Stacked removal, restricted building exhaust, seized fasteners, gas-system work or additional diagnosed operation: quote incremental labor before repair.

LAR-DRY-081 — Wiring harness repair

Included work: Isolate electrical power; protect dryer and nearby surfaces. Find and repair localized damaged dryer harness/connectors; restore insulation and strain relief. Reassemble and restore all disturbed guards/connections. Verification: Verify affected circuits and appliance function.

Additional conditions: Stacked removal, restricted building exhaust, seized fasteners, gas-system work or additional diagnosed operation: quote incremental labor before repair.

LAR-DRY-082 — Complete gas valve assembly replacement

Included work: Qualified gas-appliance technician isolates electrical and gas supplies where required. On gas dryer, qualified technician replaces authorized complete gas valve assembly. Reassemble and restore all disturbed guards/connections. Verification: Perform gas-joint leak check and safe ignition/heat verification.

Additional conditions: Stacked removal, restricted building exhaust, seized fasteners, gas-system work or additional diagnosed operation: quote incremental labor before repair.

LAR-DRY-083 — Internal lint and accessible exhaust cleaning

Included work: Isolate electrical power; protect dryer and nearby surfaces. Open accessible lint chambers and service panels; remove lint and restore duct connections as agreed. Reassemble and restore all disturbed guards/connections. Verification: Verify airflow; excludes full building vent run/chimney cleaning.

Additional conditions: Stacked removal, restricted building exhaust, seized fasteners, gas-system work or additional diagnosed operation: quote incremental labor before repair.

LAR-DRY-084 — Moisture sensor cleaning

Included work: Isolate electrical power; protect dryer and nearby surfaces. Clean accessible moisture-sensing bars and remove film without damaging sensors. Reassemble and restore all disturbed guards/connections. Verification: Verify sensor response or diagnostic mode if available.

Additional conditions: Stacked removal, restricted building exhaust, seized fasteners, gas-system work or additional diagnosed operation: quote incremental labor before repair.

LAR-DRY-085 — Gas burner area cleaning

Included work: Qualified gas-appliance technician isolates electrical and gas supplies where required. Qualified gas-appliance technician opens approved burner-service access and removes accessible lint/debris. Reassemble and restore all disturbed guards/connections. Verification: Verify safe burner ventilation and ignition.

Additional conditions: Stacked removal, restricted building exhaust, seized fasteners, gas-system work or additional diagnosed operation: quote incremental labor before repair.


Recent Posts

See All
Range Hood Repair Labor Prices

3 repair labor operations with three appliance classes, detailed service steps and conditions. Local Appliance Repair, Castro Valley/Hayward.

 
 
Oven and Range Repair Labor Prices

24 repair labor operations with three appliance classes, detailed service steps and conditions. Local Appliance Repair, Castro Valley/Hayward.

 
 

Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.
  • Instagram
  • Facebook
  • Whatsapp

Created by Local Appliance LLC

bottom of page