top of page

Microwave Repair Labor Prices

10 hours ago
6 min read

Microwave Repair Labor Prices

Local Appliance Repair — detailed labor-price reference for microwave repair labor prices; 20 itemized operations.

Labor-only estimates for Economy, Middle and Premium model classes. Replacement parts are quoted separately. Exact operation and equipment class must be verified from model number and diagnosis.

Appliance age scenarios: 0–5 years ×1.00; over 5 through 10 years ×1.25; over 10 years ×1.50. Adjustments above ×1.00 require inspection, explanation and agreement before work. Never count identical access work twice.

Standard diagnostic visit: $65, credited toward an eligible completed repair. Six-month workmanship warranty applies to qualifying work; part warranties vary under the Company Facts policy.


Microwave — labor by operation

Operation / code

Economy labor

Middle labor

Premium labor

Microwave door interlock switch replacement (LAR-MIC-110)

$185

$210

$245

Microwave light socket replacement (LAR-MIC-111)

$180

$205

$235

Internal fuse replacement (LAR-MIC-112)

$175

$195

$230

Turntable motor replacement (LAR-MIC-113)

$190

$215

$250

Keypad contact repair (LAR-MIC-114)

$200

$225

$265

Magnetron replacement (LAR-MIC-115)

$240

$270

$320

High-voltage capacitor replacement (LAR-MIC-116)

$240

$270

$320

High-voltage diode replacement (LAR-MIC-117)

$225

$255

$295

Cooling fan replacement (LAR-MIC-118)

$225

$255

$295

Door latch replacement (LAR-MIC-119)

$215

$240

$280

Electronic control board replacement (LAR-MIC-120)

$240

$270

$315

Touch panel / membrane replacement (LAR-MIC-121)

$240

$270

$315

High-voltage transformer replacement (LAR-MIC-122)

$315

$355

$410

Inverter board replacement (LAR-MIC-123)

$275

$310

$360

Wiring harness repair (LAR-MIC-124)

$275

$310

$360

Built-in microwave complete door replacement (LAR-MIC-125)

$330

$370

$430

Magnetron and capacitor replacement package (LAR-MIC-126)

$305

$340

$400

Full control assembly replacement (LAR-MIC-127)

$290

$325

$380

Over-range microwave removal / reinstallation only (LAR-MIC-128)

$85

$95

$110

Cooling fan / airflow cleaning (LAR-MIC-129)

$175

$195

$230

What each listed service includes

LAR-MIC-110 — Microwave door interlock switch replacement

Included work: Qualified microwave technician only: isolate power and observe high-voltage/door-interlock safety precautions. Qualified microwave technician accesses door-interlock switch assembly and replaces failed switch after safeguarding high-voltage components. Reassemble and restore all disturbed guards/connections. Verification: Verify all interlocks, door closure and microwave leakage safety as specified.

Additional conditions: Model-specific built-in removal, inaccessible mounting, additional failed component or necessary separately agreed safety-work step: revise written estimate before work.

LAR-MIC-111 — Microwave light socket replacement

Included work: Qualified microwave technician only: isolate power and observe high-voltage/door-interlock safety precautions. Qualified technician accesses failed microwave lamp socket and fits approved replacement. Reassemble and restore all disturbed guards/connections. Verification: Verify illumination and protective enclosure.

Additional conditions: Model-specific built-in removal, inaccessible mounting, additional failed component or necessary separately agreed safety-work step: revise written estimate before work.

LAR-MIC-112 — Internal fuse replacement

Included work: Qualified microwave technician only: isolate power and observe high-voltage/door-interlock safety precautions. Qualified microwave technician accesses internal fuse and replaces it only after diagnosing the cause of fuse failure. Reassemble and restore all disturbed guards/connections. Verification: Verify safe function and correct rated protection.

Additional conditions: Model-specific built-in removal, inaccessible mounting, additional failed component or necessary separately agreed safety-work step: revise written estimate before work.

LAR-MIC-113 — Turntable motor replacement

Included work: Qualified microwave technician only: isolate power and observe high-voltage/door-interlock safety precautions. Access turntable drive motor beneath protected base; replace specified motor and linkage. Reassemble and restore all disturbed guards/connections. Verification: Verify turntable rotation in test operation.

Additional conditions: Model-specific built-in removal, inaccessible mounting, additional failed component or necessary separately agreed safety-work step: revise written estimate before work.

LAR-MIC-114 — Keypad contact repair

Included work: Qualified microwave technician only: isolate power and observe high-voltage/door-interlock safety precautions. Access microwave keypad and repair documented contact fault only where approved and serviceable. Reassemble and restore all disturbed guards/connections. Verification: Check buttons, startup control and protective enclosure.

Additional conditions: Model-specific built-in removal, inaccessible mounting, additional failed component or necessary separately agreed safety-work step: revise written estimate before work.

LAR-MIC-115 — Magnetron replacement

Included work: Qualified microwave technician only: isolate power and observe high-voltage/door-interlock safety precautions. Qualified microwave high-voltage technician replaces diagnosed magnetron with model-specified part. Reassemble and restore all disturbed guards/connections. Verification: Verify heating performance, interlocks and microwave leakage safety as applicable.

Additional conditions: Model-specific built-in removal, inaccessible mounting, additional failed component or necessary separately agreed safety-work step: revise written estimate before work.

LAR-MIC-116 — High-voltage capacitor replacement

Included work: Qualified microwave technician only: isolate power and observe high-voltage/door-interlock safety precautions. Qualified microwave high-voltage technician replaces failed HV capacitor using approved service procedure. Reassemble and restore all disturbed guards/connections. Verification: Verify heating operation and safety checks; never consumer DIY.

Additional conditions: Model-specific built-in removal, inaccessible mounting, additional failed component or necessary separately agreed safety-work step: revise written estimate before work.

LAR-MIC-117 — High-voltage diode replacement

Included work: Qualified microwave technician only: isolate power and observe high-voltage/door-interlock safety precautions. Qualified microwave high-voltage technician replaces diagnosed HV diode with correct polarity/rating. Reassemble and restore all disturbed guards/connections. Verification: Verify heating and electrical safety checks.

Additional conditions: Model-specific built-in removal, inaccessible mounting, additional failed component or necessary separately agreed safety-work step: revise written estimate before work.

LAR-MIC-118 — Cooling fan replacement

Included work: Qualified microwave technician only: isolate power and observe high-voltage/door-interlock safety precautions. Access microwave cooling fan/shroud, replace diagnosed motor and restore airflow path. Reassemble and restore all disturbed guards/connections. Verification: Verify fan operation and overheating protection.

Additional conditions: Model-specific built-in removal, inaccessible mounting, additional failed component or necessary separately agreed safety-work step: revise written estimate before work.

LAR-MIC-119 — Door latch replacement

Included work: Qualified microwave technician only: isolate power and observe high-voltage/door-interlock safety precautions. Replace damaged microwave mechanical door latch components only under approved door-service procedure. Reassemble and restore all disturbed guards/connections. Verification: Verify latching, interlock sequencing and leakage protection.

Additional conditions: Model-specific built-in removal, inaccessible mounting, additional failed component or necessary separately agreed safety-work step: revise written estimate before work.

LAR-MIC-120 — Electronic control board replacement

Included work: Qualified microwave technician only: isolate power and observe high-voltage/door-interlock safety precautions. Access low-voltage electronic controller while complying with HV-safety procedure; replace configured board. Reassemble and restore all disturbed guards/connections. Verification: Check modes, interlock behavior and operating functions.

Additional conditions: Model-specific built-in removal, inaccessible mounting, additional failed component or necessary separately agreed safety-work step: revise written estimate before work.

LAR-MIC-121 — Touch panel / membrane replacement

Included work: Qualified microwave technician only: isolate power and observe high-voltage/door-interlock safety precautions. Access keypad fascia and replace failed touch membrane/panel. Reassemble and restore all disturbed guards/connections. Verification: Verify user input and operating controls.

Additional conditions: Model-specific built-in removal, inaccessible mounting, additional failed component or necessary separately agreed safety-work step: revise written estimate before work.

LAR-MIC-122 — High-voltage transformer replacement

Included work: Qualified microwave technician only: isolate power and observe high-voltage/door-interlock safety precautions. Qualified microwave high-voltage technician replaces diagnosed high-voltage transformer. Reassemble and restore all disturbed guards/connections. Verification: Verify heating and grounding/leakage-related safety checks as required.

Additional conditions: Model-specific built-in removal, inaccessible mounting, additional failed component or necessary separately agreed safety-work step: revise written estimate before work.

LAR-MIC-123 — Inverter board replacement

Included work: Qualified microwave technician only: isolate power and observe high-voltage/door-interlock safety precautions. Qualified microwave high-voltage technician replaces manufacturer-approved inverter power board. Reassemble and restore all disturbed guards/connections. Verification: Verify heating response and all specified safety checks.

Additional conditions: Model-specific built-in removal, inaccessible mounting, additional failed component or necessary separately agreed safety-work step: revise written estimate before work.

LAR-MIC-124 — Wiring harness repair

Included work: Qualified microwave technician only: isolate power and observe high-voltage/door-interlock safety precautions. Qualified microwave technician repairs localized harness fault without bypassing protection or interlocks. Reassemble and restore all disturbed guards/connections. Verification: Verify affected circuit and all required microwave safety checks.

Additional conditions: Model-specific built-in removal, inaccessible mounting, additional failed component or necessary separately agreed safety-work step: revise written estimate before work.

LAR-MIC-125 — Built-in microwave complete door replacement

Included work: Qualified microwave technician only: isolate power and observe high-voltage/door-interlock safety precautions. Qualified microwave technician replaces complete approved door assembly only if manufacturer service procedure allows. Reassemble and restore all disturbed guards/connections. Verification: Verify all interlocks, door alignment and microwave leakage safety.

Additional conditions: Model-specific built-in removal, inaccessible mounting, additional failed component or necessary separately agreed safety-work step: revise written estimate before work.

LAR-MIC-126 — Magnetron and capacitor replacement package

Included work: Qualified microwave technician only: isolate power and observe high-voltage/door-interlock safety precautions. Qualified microwave high-voltage technician replaces specifically diagnosed magnetron and HV capacitor components as a quoted bundle. Reassemble and restore all disturbed guards/connections. Verification: Verify heating, door safety and microwave leakage; no duplication of component labor.

Additional conditions: Model-specific built-in removal, inaccessible mounting, additional failed component or necessary separately agreed safety-work step: revise written estimate before work.

LAR-MIC-127 — Full control assembly replacement

Included work: Qualified microwave technician only: isolate power and observe high-voltage/door-interlock safety precautions. Replace complete supported microwave controller/interface assembly and restore secured shield/panels. Reassemble and restore all disturbed guards/connections. Verification: Verify functions, interlocks and required microwave safety checks.

Additional conditions: Model-specific built-in removal, inaccessible mounting, additional failed component or necessary separately agreed safety-work step: revise written estimate before work.

LAR-MIC-128 — Over-range microwave removal / reinstallation only

Included work: Qualified microwave technician only: isolate power and observe high-voltage/door-interlock safety precautions. With appropriate lifting support, remove over-range microwave from approved wall/cabinet mounts and reinstall. Reassemble and restore all disturbed guards/connections. Verification: Verify secure mounting, power and ventilation; excludes internal appliance repair.

Additional conditions: Model-specific built-in removal, inaccessible mounting, additional failed component or necessary separately agreed safety-work step: revise written estimate before work.

LAR-MIC-129 — Cooling fan / airflow cleaning

Included work: Qualified microwave technician only: isolate power and observe high-voltage/door-interlock safety precautions. Qualified technician accesses approved non-high-voltage cleaning path and removes dust/debris from cooling-air passage. Reassemble and restore all disturbed guards/connections. Verification: Check cooling airflow and enclosure integrity; not a consumer internal cleaning task.

Additional conditions: Model-specific built-in removal, inaccessible mounting, additional failed component or necessary separately agreed safety-work step: revise written estimate before work.


Recent Posts

See All
Range Hood Repair Labor Prices

3 repair labor operations with three appliance classes, detailed service steps and conditions. Local Appliance Repair, Castro Valley/Hayward.

 
 
Oven and Range Repair Labor Prices

24 repair labor operations with three appliance classes, detailed service steps and conditions. Local Appliance Repair, Castro Valley/Hayward.

 
 

Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.
  • Instagram
  • Facebook
  • Whatsapp

Created by Local Appliance LLC

bottom of page