top of page

Washing Machine Repair Labor Prices

10 hours ago
11 min read

Washing Machine Repair Labor Prices

Local Appliance Repair — detailed labor-price reference for washing machine repair labor prices; 32 itemized operations.

Labor-only estimates for Economy, Middle and Premium model classes. Replacement parts are quoted separately. Exact operation and equipment class must be verified from model number and diagnosis.

Appliance age scenarios: 0–5 years ×1.00; over 5 through 10 years ×1.25; over 10 years ×1.50. Adjustments above ×1.00 require inspection, explanation and agreement before work. Never count identical access work twice.

Standard diagnostic visit: $65, credited toward an eligible completed repair. Six-month workmanship warranty applies to qualifying work; part warranties vary under the Company Facts policy.


Washer — labor by operation

Operation / code

Economy labor

Middle labor

Premium labor

Door lock / lid switch replacement (LAR-WAS-001)

$185

$210

$245

Water level / pressure sensor replacement (LAR-WAS-002)

$185

$210

$245

Drive belt replacement (LAR-WAS-003)

$190

$215

$250

Start capacitor replacement (LAR-WAS-004)

$185

$210

$245

Lid sensor replacement (LAR-WAS-005)

$180

$205

$235

Drain pump replacement (LAR-WAS-006)

$205

$235

$275

Recirculation pump replacement (LAR-WAS-007)

$205

$235

$275

Agitator repair or replacement (LAR-WAS-008)

$205

$235

$275

Water inlet valve replacement (LAR-WAS-009)

$205

$235

$275

Shock absorber replacement (LAR-WAS-010)

$225

$255

$295

Detergent dispenser assembly replacement (LAR-WAS-011)

$225

$255

$295

Suspension rod replacement (LAR-WAS-012)

$225

$255

$295

Clutch assembly replacement (LAR-WAS-013)

$225

$255

$295

Timer / cycle selector replacement (LAR-WAS-014)

$225

$255

$295

Control board replacement (LAR-WAS-015)

$260

$290

$340

Control panel / display replacement (LAR-WAS-016)

$260

$290

$340

Washer heating element replacement (LAR-WAS-017)

$255

$285

$335

Door boot / bellow replacement (LAR-WAS-018)

$260

$290

$340

Drum pulley replacement (LAR-WAS-019)

$260

$290

$340

Motor bearing replacement (LAR-WAS-020)

$275

$310

$360

Drive motor replacement (LAR-WAS-021)

$300

$335

$390

Tub bearing replacement (LAR-WAS-022)

$360

$405

$470

Transmission / gearcase replacement (LAR-WAS-023)

$330

$370

$430

Drum spider support replacement (LAR-WAS-024)

$365

$410

$480

Tub seal replacement (LAR-WAS-025)

$300

$335

$390

Wiring harness repair (LAR-WAS-026)

$250

$280

$325

Drain pump cleaning / impeller obstruction removal (LAR-WAS-027)

$205

$230

$270

Accessible pump filter cleaning (LAR-WAS-028)

$125

$140

$165

Detergent drawer and housing cleaning (LAR-WAS-029)

$130

$145

$170

Drain hose cleaning (LAR-WAS-030)

$150

$170

$195

Water inlet screen cleaning (LAR-WAS-031)

$140

$160

$185

Under-agitator cleaning (top load) (LAR-WAS-032)

$175

$195

$230

What each listed service includes

LAR-WAS-001 — Door lock / lid switch replacement

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Access door-lock mechanism or top-load lid-switch circuit; remove and fit the model-correct lock/switch; reconnect its connector. Reassemble and restore all disturbed guards/connections. Verification: Confirm door/lid detection and safe cycle start.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-002 — Water level / pressure sensor replacement

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Access pressure sensor and its pressure hose; replace the diagnosed sensor and reseat hose/connector. Reassemble and restore all disturbed guards/connections. Verification: Confirm fill-level sensing and a controlled fill/drain sequence.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-003 — Drive belt replacement

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Open the drive-access panel; remove worn drive belt and fit the specified belt with correct alignment. Reassemble and restore all disturbed guards/connections. Verification: Confirm drum/agitation drive and spin without belt slip.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-004 — Start capacitor replacement

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Access the motor start circuit; replace the failed capacitor only on models using this component. Reassemble and restore all disturbed guards/connections. Verification: Confirm motor starts and operates normally.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-005 — Lid sensor replacement

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Access the lid-position sensor and related connector; fit the correct sensor. Reassemble and restore all disturbed guards/connections. Verification: Confirm lid recognition and cycle interlock operation.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-006 — Drain pump replacement

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Access the drain pump; detach electrical and water connections as required; replace failed pump and restore hoses/clamps. Reassemble and restore all disturbed guards/connections. Verification: Run drain test and inspect disturbed joints for leaks.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-007 — Recirculation pump replacement

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Access the circulation or recirculation pump on equipped models; replace the diagnosed pump and reconnect hoses. Reassemble and restore all disturbed guards/connections. Verification: Check recirculation during the applicable cycle and inspect for leaks.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-008 — Agitator repair or replacement

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Access top-load agitator; service coupling or replace compatible agitator assembly as quoted. Reassemble and restore all disturbed guards/connections. Verification: Check agitation and secure attachment.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-009 — Water inlet valve replacement

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Access water inlet valve; isolate water connections, replace valve and reconnect supply hoses. Reassemble and restore all disturbed guards/connections. Verification: Test controlled filling, shutoff and connection tightness.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-010 — Shock absorber replacement

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Access washer suspension/shock mounting points; replace quoted shock absorbers and refasten mounts. Reassemble and restore all disturbed guards/connections. Verification: Check tub stability and controlled spin.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-011 — Detergent dispenser assembly replacement

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Access detergent dispenser assembly; disconnect required feed hoses and replace dispenser housing. Reassemble and restore all disturbed guards/connections. Verification: Run water-flow test and check housing seals for leaks.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-012 — Suspension rod replacement

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Open top-load cabinet access; replace specified suspension rods as a matched set when required. Reassemble and restore all disturbed guards/connections. Verification: Check drum centering, balance and spin.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-013 — Clutch assembly replacement

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Access clutch/drive assembly on models equipped with one; replace diagnosed clutch components. Reassemble and restore all disturbed guards/connections. Verification: Check agitation/spin engagement.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-014 — Timer / cycle selector replacement

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Access timer or cycle-selector assembly on models equipped with that control; replace and reconnect. Reassemble and restore all disturbed guards/connections. Verification: Verify selection and advancement through representative cycle functions.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-015 — Control board replacement

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Access electronic control board; transfer specified wiring connectors and fit programmed or compatible replacement. Reassemble and restore all disturbed guards/connections. Verification: Check startup, error codes and affected wash functions; program when specified.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-016 — Control panel / display replacement

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Access user interface/display module; replace or service specified panel assembly. Reassemble and restore all disturbed guards/connections. Verification: Verify buttons/display and requested cycle controls.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-017 — Washer heating element replacement

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. On washer models with an internal heater, access the heater and temperature connections; replace sealed heater assembly. Reassemble and restore all disturbed guards/connections. Verification: Check heater-control diagnostics and seal tightness using the specified service procedure.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-018 — Door boot / bellow replacement

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Access front-load door boot; remove clamps, replace boot and refit all seals/clamps. Reassemble and restore all disturbed guards/connections. Verification: Run leak inspection around door seal and a short cycle.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-019 — Drum pulley replacement

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Access drive-pulley system; remove damaged pulley and fit manufacturer-correct mounting hardware. Reassemble and restore all disturbed guards/connections. Verification: Check drive alignment and spin noise.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-020 — Motor bearing replacement

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. On repairable motor assemblies, remove motor and service specified motor bearings or authorized assembly. Reassemble and restore all disturbed guards/connections. Verification: Check motor rotation, noise and spin; confirm bearing is separately serviceable.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-021 — Drive motor replacement

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Remove necessary cabinet/tub drive components; replace drive motor and refit electrical/drive connections. Reassemble and restore all disturbed guards/connections. Verification: Check motor speed control, agitation and spin.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-022 — Tub bearing replacement

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Disassemble specified drum/tub sections as service design allows; replace tub bearings and shaft seals as quoted. Reassemble and restore all disturbed guards/connections. Verification: Check drum rotation, spin and water tightness; confirm bearing replacement is supported for model.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-023 — Transmission / gearcase replacement

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Access drive system; remove and replace transmission/gearcase as compatible with model. Reassemble and restore all disturbed guards/connections. Verification: Check agitation and spin drive under controlled load.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-024 — Drum spider support replacement

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Disassemble model-approved tub/drum assembly; replace drum spider/support or required tub unit. Reassemble and restore all disturbed guards/connections. Verification: Check drum support, alignment and spin vibration; confirm separate spider is serviceable.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-025 — Tub seal replacement

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Disassemble the required tub sections; replace damaged tub seal and refit fasteners. Reassemble and restore all disturbed guards/connections. Verification: Run fill/drain and spin checks for leaks.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-026 — Wiring harness repair

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Trace and repair localized damaged wiring/connectors within approved scope; secure and insulate repaired harness. Reassemble and restore all disturbed guards/connections. Verification: Verify affected electrical function and protective covers.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-027 — Drain pump cleaning / impeller obstruction removal

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Access drain pump chamber where serviceable; remove foreign matter and clean pump impeller/volute. Reassemble and restore all disturbed guards/connections. Verification: Check impeller turns as specified, drain performance and leaks.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-028 — Accessible pump filter cleaning

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Open owner-accessible pump filter per model procedure; remove debris and refit filter/cap. Reassemble and restore all disturbed guards/connections. Verification: Verify drain operation and confirm filter seal is dry.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-029 — Detergent drawer and housing cleaning

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Remove removable detergent drawer; clean residues and accessible dispenser housing channels. Reassemble and restore all disturbed guards/connections. Verification: Confirm water distribution and drawer seating.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-030 — Drain hose cleaning

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Access and flush removable drain hose/trap as required without replacing it. Reassemble and restore all disturbed guards/connections. Verification: Verify free drainage and dry hose connections.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-031 — Water inlet screen cleaning

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. Access inlet screens after shutting off water; remove mineral/debris blockage without damaging valves. Reassemble and restore all disturbed guards/connections. Verification: Verify adequate filling and leak-free supply connections.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.

LAR-WAS-032 — Under-agitator cleaning (top load)

Included work: Isolate electrical power; close water supply when fittings or hoses must be opened; protect floor and cabinet. On an applicable top-load agitator design, remove agitator/cap and clean accessible area beneath. Reassemble and restore all disturbed guards/connections. Verification: Refit agitator and verify agitation without abnormal rubbing.

Additional conditions: Stacked installation, blocked access, seized fasteners, additional mechanical failure or second operation: itemize incremental labor only; obtain approval before work.


Recent Posts

See All
Range Hood Repair Labor Prices

3 repair labor operations with three appliance classes, detailed service steps and conditions. Local Appliance Repair, Castro Valley/Hayward.

 
 
Oven and Range Repair Labor Prices

24 repair labor operations with three appliance classes, detailed service steps and conditions. Local Appliance Repair, Castro Valley/Hayward.

 
 

Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.
  • Instagram
  • Facebook
  • Whatsapp

Created by Local Appliance LLC

bottom of page